Osage Type III Ambulances

Type3A Type III ambulance, much like a Type I ambulance, has a separate square patient compartment that is mounted onto an existing chassis. As a result, a lot of people wonder what exactly the difference is between the two types of ambulances. The difference lies in what types of chassis are used. A Type 3 ambulance is mounted on the cut-a-way chassis of a van. By contrast, Type I ambulances utilize a truck chassis.

Otherwise, there are a lot of similarities between the two types. Osage Ambulances offers three different models of Type III ambulances, which parallels the Type I offerings. The Brave Type III ambulance, Warrior Type III ambulance and Super Warrior Type III ambulance are all available. All three of them are built with a completely seamless body construction. The patient compartment is built separately and then lowered down onto and attached to the chassis on which it will be built.

Type III ambulances from Osage all have a one-piece exterior side panel, as well as a one-piece crowned roof. All of the Type 3 ambulances also offer an ALS compartment with in and out access, as well as a patient compartment that has a thermostatically controlled temperature management system. They offer locking containers and compartments for the storage of drugs and sharps, as well.

All of the Type III ambulances from Osage Ambulances are built to high quality specifications to meet the needs of all our customers.

Osage Type III Brave Ambulance

If you are looking for a basic, no-frills Type III ambulance, The Brave ambulance from Osage Ambulances is for you. It is available in three different chassis options to fit your needs, including the Ford E-350, Mercedes Sprinter, or the Chevrolet G-3500. Still, whatever chassis choice you make, they all share a lot of common features.

They each have a separate, square patient compartment that is built with seamless construction. They are built with one-piece exterior panels on the sides and a crowned roof that is also one piece. Also, the lower rear, lower front and lower third of doors all have diamond plate shields. Finally, it boasts a 49” wide aisle space so the crew inside can work efficiently to make the patient as comfortable as possible.

The Brave Type III ambulance provides an entry level offering at the Type III ambulance level. It’s ideal for those who need more than the Type I level has to offer, but don’t need the highest performing models available from Osage.

Brave Type III Features and Benefits

When combining their recognizable brands with the high quality craftsmanship from Osage Ambulances, customers can expect to get an impressive vehicle out of the Osage Brave Type III ambulance.

  • Totally “seamless” body construction
  • Exterior side and roof panel .125″ aluminum
  • One-piece exterior side panels and one-piece crowned roof
  • Diamond plate shields across lower rear and front of body and lower 1/3 of entry doors
  • All exterior doors “pan-formed” / extruded double break construction
  • Cast “grabber” door holders
  • Squad bench and EMT seat
  • ALS compartment with in/out access
  • Adjustable and fixed shelves in ALS
  • Thermostatically controlled patient compartment heat and cool system
  • Return air filtration
  • Two recessed, swing-up Dual IV hangers
  • “Zico” retaining bracket for Oxygen “M” cylinder and three “Ohio” oxygen outlets
  • Impact #324 self-contained suction system
  • Locking Sharps container
  • Locking drug compartment
  • Ferno Cot Fastener

Osage Type III Brave Specs

Ford E-350 Gas

Chevy G-3500

Mercedes Sprinter 3500

Wheel Base (w/ Dual Rear Wheel)

138″

139″

144″

GVWR

11,500 lbs

12,300 lbs

11.030 lbs

Engine

6.8 L EFI Triton V10 Gas

6.6 L Duramax Turbo Diesel w/ Block Heater wired to the Shoreline

Bluetec SCR Diesel

Transmission

5-Sleep Electronic w/ Overdrive

4-Speed Automatic

5-Speed Electronic w/ Overdrive

Drive Type

4×2

4×2

4×2

Module Dimension

144″ L x 81″ H x 92″ W

144″ L x 81″ H x 94″ W

144″ L x 89.5″ H x 86″ W

Interior Head Room

66″

66″

66″

Aisle Width

49″

49″

46″

Standard Drawings

Download

Download

Download

Standard Features

N/A

Download

Download

Osage Type III Warrior Ambulance

The Warrior Type III ambulance from Osage Ambulances is offered in two different models. Customers can opt for a Ford E-350 or a Chevrolet G-3500. Each one comes with a number of complimentary standard features. The Warrior Type III ambulances are simply an enlarged version of the Brave Type III ambulance. While the Brave Type III is 144 inches long, the Warrior Type III ambulance extends to 4 inches longer, coming in at 148 inches in length. It also has an enhanced electrical system and more exterior compartments than the Brave model.

All Type III ambulances from Osage Ambulances have a seamless body construction, as well as one-piece panels for the sides and roof. Add onto that a thermostatically controlled heating and cooling system for the patient compartment and return air filtration. They also include locking containers for sharps, as well as a locking drug compartment. Check out more specifications below on the two different chassis options for the Warrior Type III ambulance.

Warrior Type III Features and Benefits

Warrior Type III ambulances are mid-sized Type III ambulances, which are suitable for most standard ambulance uses. They offer a good blend between size and cost-efficiency.

  • Totally “seamless” body construction
  • Exterior side and roof panel .125″ aluminum
  • One-piece exterior side panels and one-piece crowned roof
  • Diamond plate shields across lower rear and front of body and lower 1/3 of entry doors
  • All exterior doors “pan-formed” / extruded double break construction
  • Cast “grabber” door holders
  • Squad bench and EMT seat
  • ALS compartment with in/out access
  • Adjustable and fixed shelves in ALS
  • Thermostatically controlled patient compartment heat and cool system
  • Return air filtration
  • Two recessed, swing-up Dual IV hangers
  • “Zico” retaining bracket for Oxygen “M” cylinder and three “Ohio” oxygen outlets
  • Impact #324 self-contained suction system
  • Locking Sharps container
  • Locking drug compartment
  • Ferno Cot Fastener

Osage Type III Warrior Specs

Ford E-350 Gas

Chevy G-3500

Wheel Base (w/ Dual Rear Wheel)

138″

139″

GVWR

11,500 lbs

12,300 lbs

Engine

6.8 L EFI Triton V10 Gas

6.6 L Duramax Turbo Diesel w/ Block Heater wired to Shoreline

Transmission

5-Speed Electronic w/ Overdrive

4-Speed Automatic

Drive Type

4×2

4×2

Module Dimension

148″ L x 83″ H x 94″ W

148″ L x 83″ H x 94″ W

Interirore HeadRoom

68″

68″

Aisle Width

49″

49″

Standard Drawings

Download

Download

Standard Features

N/A

Download

Osage Type III Super Warrior Ambulance

The Super Warrior Type III ambulance is the largest Type III ambulance available from Osage, and it is offered in two different chassis types. The Super Warrior Type III ambulance can be ordered on the Ford E-450 chassis or the Chevrolet G-4500. Like all of the Type III ambulance options offered by Osage, it comes with a number of standard features on either option.

The Super Warrior Type III ambulance always has a seamless body construction, thanks to a process of craftsmanship that Osage values greatly. Like other Osage ambulances, the Super Warrior Type III ambulance includes compartments that can be locked in order to dispose of sharps and keep drugs safe.

Both chassis options are rated for more than 14,000 pounds in weight and boast an expansive 51″ aisle space to promote comfort and easy movements while tending to patients. Checking in at 168 inches in length, 87 inches in height and 96 inches in width, it is no wonder the Type III Super Warrior is our most popular unit!

Osage Type III Super Warrior Features and Benefits

All of our Super Warrior Type III ambulances live up to the toughest tests in the field. Super Warrior Type III ambulances are designed to take anything that can be thrown at them. In other words, if you’re looking for the biggest, strongest, toughest ambulances on the market, you need a Super Warrior Type III ambulance from Osage.

  • Totally “seamless” body construction
  • Exterior side and roof panel .125″ aluminum
  • One-piece exterior side panels and one-piece crowned roof
  • Diamond plate shields across lower rear and front of body and lower 1/3 of entry doors
  • All exterior doors “pan-formed” / extruded double break construction
  • Cast “grabber” door holders
  • Squad bench and EMT seat
  • ALS compartment with in/out access
  • Adjustable and fixed shelves in ALS
  • Thermostatically controlled patient compartment heat and cool system
  • Return air filtration
  • Two recessed, swing-up Dual IV hangers
  • “Zico” retaining bracket for Oxygen “M” cylinder and three “Ohio” oxygen outlets
  • Impact #324 self-contained suction system
  • Locking Sharps container
  • Locking drug compartment
  • Ferno Cot Fastener

Osage Type III Super Warrior Specs

Ford E-450 Gas

Chevy G-4500

Wheel Base (w/ Dual Rear Wheel)

158″

159″

GVWR

14,500 lbs

14,200 lbs

Engine

6.8 L EFI Triton V10 Gas

6.6 L Duramax Turbo Diesel w/ Block Heater wired to the Shoreline

Transmission

5-Speed Electronic w/ Overdrive

6-Speed Automatic

Drive Type

4×2 or 4×4

4×2

Module Dimension

168″ L x 87″ H x 96″ W

168″ L x 87″ H x 96″ W

Interirore HeadRoom

72″

72″

Aisle Width

51″

51″

Standard Drawings

Download

Download

Standard Features

N/A

Download